Aquello Installation
Under-sink reverse osmosis installation for UK homes
Aquello is designed to fit neatly under the sink and connect to your existing kitchen setup. A typical installation connects the system to the mains cold water supply, a dedicated drinking water tap, the sink waste pipe, and a nearby power socket. Once installed, the system is flushed, tested, and checked for leaks before normal drinking use.
Installation at a Glance
Under-sink setup
Designed to fit neatly below the sink in a standard UK kitchen layout.
Dedicated drinking water tap
Filtered drinking water is supplied through its own separate tap.
Cold water, drain and power
The system connects to the cold water supply, sink waste pipe and power socket.
Guidance and paid installation
Contact Aquello before ordering for setup guidance and professional installation.
How Installation Works
A typical Aquello installation involves a few key under-sink connections, followed by flushing and testing before normal use.
Typical Under-Sink Layout
Aquello is usually installed inside the cupboard below the sink. Your main kitchen tap stays the same, while filtered drinking water is supplied through the separate Aquello tap. The system connects to the cold water supply, waste pipe, and a nearby power socket.
Professional installation is available as a separate paid service, subject to your location and kitchen setup. Contact us before ordering to discuss your under-sink space, tap position, cold water supply, waste pipe access, and power socket requirements.
Not always. Someone with suitable tools and practical plumbing experience may be able to install the system. However, professional installation is recommended if you are not confident working with under-sink pipework, tap fitting, or drain connections.
Yes. Aquello supplies filtered drinking water through a dedicated tap, usually fitted to the sink or worktop. If there is already a suitable spare tap hole, it may be possible to use it; otherwise, a new opening may be required.
Yes. The system requires a nearby electrical socket for normal operation. If there is no suitable socket nearby, this should be considered before installation.
A standard installation is often completed within a few hours, but the exact time depends on cupboard space, tap position, worktop material, access to pipework, and whether any additional preparation is required.
The system should be flushed before normal drinking use. This helps clear the new filters, prepare the membrane, and confirm that water is flowing correctly through the system.
Need Help Planning Your Installation?
Not sure whether your kitchen setup is suitable?
Contact Aquello before ordering. You can send photos of the under-sink area, and we’ll help you understand the key installation requirements.
Professional installation is also available as a separate paid service, subject to your location and kitchen setup.
